Dolphin Maytronics 99954230-ASSY | Bluetooth remote control for iOT Dolphin transformer

iOT radio control with Bluetooth connection compatible only with the iOT transformer.

Specific for Dolphin pool robots produced from 2020 onwards:

Dolphin Explorer Plus
Dolphin M400
Dolphin M500
Dolphin M600
Dolphin M700
Dolphin F60
Dolphin Zenith 60

Original Maytronics spare part.

The remote control offers two modes of operation:

Automatic mode - cleaning parameters can be changed.
Manual driving mode - the movement can be controlled by hand.

Getting started with the remote control

If the robot is off, turn on the remote control unit and wait 2 seconds to see the screen display.
Press the Clean icon.
The power supply will turn on, and a blue LED will appear.
The robot will start cleaning according to the selected settings.

Automatic mode

The remote control offers two automatic operating modes:

Delayed operation
Weekly operation

In delayed operation mode, you can set the robot to clean the pool later by pressing CLEAN LATER.

The power supply will start flashing green.
After an hour, the robot will start working.
If you want to cancel the CLEAN LATER program, press the CLEAN LATER icon again.
When the power supply stops flashing, the program is canceled.
In Weekly Operation mode, you can set your own cleaning schedule.
You can choose whether you want to clean the pool every two days or every three days.

Manual driving mode

You can use manual driving mode to control how the Dolphin robot navigates around the pool.

If the robot is on – turn on the remote control, press the mode selector, and use the direction control arrows to control the robot's movement in the pool.
If the robot is off – turn on the remote control and wait 60 seconds until the self-test is completed.
Press the mode selector, and use the direction control arrows to control the robot's movement in the pool.

NOTE: If the signal bar is flashing or if the connection to the power supply is lost, it could be due to one of the following reasons: